How to Clean Your OBED's Drivetrain

To ensure your OBED continues to perform at its best, maintaining the drivetrain is crucial. A clean drivetrain enhances efficiency and prolongs the life of its components. Yet, so many cyclists neglect this key part of bike ownership. Just as you need to keep your car lubed and oil-changed, you need to care for your OBED's drivetrain in the same way. So, we’ll walk you through the steps to clean your bike's drivetrain, explain the differences between wet and dry lubes, and demonstrate how proper maintenance can keep your OBED performing at its peak.

Why Clean Your Drivetrain?

The drivetrain is the heart of your bike’s mechanical system, including the chain, cassette, chainrings, and derailleurs. Whether you’re committed to the road or a devotee to the dirt is irrelevant; over time, dirt, grime, and old lubricant can build up on these components, leading to reduced efficiency, noisy operation, poor shifting performance, and increased wear and tear. Regular cleaning of your drivetrain helps mitigate these issues, ensuring a smoother, quieter, and more efficient ride.

Tools and Supplies You'll Need

• Chain cleaning tool or a stiff brush
• Degreaser (bike-specific is best, although a mild detergent works too)
• Cassette brush or an old toothbrush
• Clean rags or shop towels
• Chain lubricant (wet or dry, depending on your ride conditions)
• Water and a bucket or hose
• Bike stand (optional, but helpful)

Step-by-Step Guide to Cleaning Your Drivetrain

1. Stabilize Your Bike

Start by making sure your bike is in a stable, upright position that allows you to easily turn the cranks backwards.  Pay attention to what is under your bike, it could get messy.  You may want to consider laying out a towel to catch any dripping degreaser or road grime.  A bike stand makes this step very easy.

2. Degrease the Chain

Removing dirt and existing lubricant from the chain can be done two ways: with a chain cleaning tool that locks over the chain, or without, using just degreaser and a brush.

Using a chain cleaning tool:

• Fill the chain cleaning tool with degreaser.
• Attach the tool to the chain as per the manufacturer's instructions.
• Rotate the pedals backward to run the chain through the tool several times, allowing the brushes and degreaser to scrub away dirt and old lubricant.

Without a chain cleaning tool:

• Apply degreaser using a cloth while rotating the pedals backward.
• Use a stiff brush to scrub the chain thoroughly.
• Rinse with water, then wipe the chain with a clean rag to remove loosened dirt and degreaser.

3. Scrub the Cassette

• Spray or drop degreaser on the cassette.
• Use a cassette brush or an old toothbrush to scrub between the gears, removing accumulated grime.
• Rinse with water to wash away the degreaser and dirt.

4. Clean the Chainrings and Derailleurs

• Apply degreaser to the chainrings and derailleurs.
• Use a brush to scrub away dirt and grease.
• Wipe clean with a rag and rinse if necessary.

5. Rinse and Dry

• After degreasing and scrubbing, rinse the drivetrain components with water to remove any remaining degreaser.
• Dry the chain, cassette, chainrings, and derailleurs thoroughly with a clean rag. It's crucial to ensure all components are dry to prevent rust.
• If using a hose, be sure not to pressure-wash water into bearings like the bottom bracket or headset. A Home Depot bucket to splash over the bike works, but we’re big fans of the two-gallon pump sprayers you can pick up at most places like Home Depot or Lowes; you can get anything from a mist to a focal stream that can target any area to rinse—handy when all that dirt and degreaser rinses from your drivetrain.

6. Lubricating the Chain

Once your drivetrain is clean and dry, it's time to lubricate the chain. Proper lubrication reduces friction, enhances efficiency, and prolongs the life of your drivetrain components. Here’s where choosing the right lube comes into play.

Wet vs. Dry Lubes: What’s the Difference?

• Wet Lube: 
• Best for: All conditions, from wet to dry.
• Characteristics: Sticky and wet, wet lube adheres well to the chain, providing long-lasting lubrication.
• Pros: Provides excellent protection against water and mud, and reduces chain wear.
• Cons: Wet lube attracts more dirt and grime, thus requiring more frequent cleaning.

• Dry Lube:
• Best for: Dry and dusty conditions.
• Characteristics: Thin and less sticky, dries to a waxy finish.
• Pros: Attracts less dirt, keeps the drivetrain cleaner.
• Cons: Wears off quicker in wet conditions, requires more frequent application in dry conditions.

How to Apply Lube

• Choose the appropriate lube for your riding conditions.
• Apply a drop of lube to each chain link while rotating the pedals backward.
• Allow the lube to penetrate the chain for a few minutes.
• Wipe off excess lube with a clean rag to prevent dirt buildup.

The End Result

So now you’ve cleared off the muck and have a nice, clean drivetrain. What’s your benefit? A well-maintained drivetrain offers several benefits:

• Improved Efficiency: A clean and well-lubricated drivetrain reduces friction, making your pedaling more efficient. This is especially important for maintaining the smooth, responsive feel of your OBED bike.
• Extended Component Life: Regular cleaning and proper lubrication reduce wear and tear on the chain, cassette, and chainrings, saving you money on replacements.
• Smoother Shifting: Clean components ensure smoother and more reliable gear changes, enhancing your riding experience on your OBED.
• Quieter Ride: A clean drivetrain operates more quietly, which is perfect for enjoying the serene rides your OBED is designed to offer.

Regularly cleaning your OBED bike's drivetrain is an essential part of bike maintenance that every cyclist should master. Not only does it improve your bike's performance, but it also extends the life of your components. Put this plan into play, load up with the right type of lube for your conditions, and you'll enjoy a smoother, more efficient ride every time you hit the road or gravel.

Shop All Bikes